ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] ·
www.ek.plus
7
EKSEL 632
USER MANUAL
Press OK for entering into menu. Select parameter to modify by
◀▶,
Level (*) or Attenuation. With OK we select option and with
◀▶ we
modify its value.
<AUX>
Preamplific.: on/off
Atenuation: xdB
AUX input Configuration.
Press OK for entering into menu. Select parameter to modify by
◀▶,
Level (*) or Attenuation. With OK we select option and with
◀▶ we
modify its value.
<MORE OPTIONS>
F.A. Status:
Config. import (**)
Config. export (**)
Default settings.
FW upgrade (**)
PIN: no/yes
Language: español/english
FW version
Press OK for entering into menu. Using
◀▶
we move for the
different options, with OK we enter into option, with
◀▶
we modify
its value and with OK we confirm it.
PIN: one we confirm yes, it will appear 0---. With
◀▶ we modify
number, with OK we confirm it and automatically we move to second
digit. Once last digit is confirmed this will be the new PIN for access to
amplifier.
Note: in case PIN is forgotten it cannot be recovered. Amplifier must
be reset (***) and all is set to factory default values.
(*) Output level will never be possible to be adjusted above the level amplifier determines in case of
AutoScanning or through OUT menu. This level set by amplifier, is the result of subtracting to amplifier
maximum output level the amount of dB due to the number of channels. This is the optimum Output
Level.
In case, for any reason, you need to adjust level above such level, and never over maximum Output
Level, the only way is by following manual configuration.
(**) These Options are only available in case an USB memory is inserted in corresponding connector.
(***) For reset plug in amplifier pressing Joystick button upwards
▲. All previous configuration will be lost.
(****) In VHF band only BIII channels can be set.
