ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] ·
www.ek.plus
5
EKSEL 632
USER MANUAL
INSTALLATION RECOMMENDATIONS:
1.- Install the equipment vertically in a well-ventilated location, ensuring not to exceed the maximum
recommended operating temperature.
2.- Leave a space between 15 cm and 20 cm, free of obstacles, around the equipment which ensures
compliance with Point no.1.
3.- Connect an appropriate earth cable to the equipment ground screw.
4.- Connect the equipment's input and output cables.
5.- Connect the power cable to the equipment.
6.- Configure.
EKSEL 632 CONFIGURATION:
Joystick functions description (button):
The button enables to scroll up or down and to the right and left of the menu. Pressing
the button is the equivalent to OK. Sometimes it is necessary to hold down the button for certain special
options.
To enter into configuration menu press OK. In the case of having a PIN configured, when touching any
button option, it will be necessary to enter the PIN. Moving to the right or left, each digit of the PIN
increases. Using OK the digit jumps to the right. Once the last digit has been entered, the menu can be
accessed after pressing OK.
Menu Overview:
Holding down any key we will access into main menu:
EKSEL462
Press OK to enter to its first line:
<V-UHF4 MODE> <DC PASS: 12v> <AUTO SCANNING> <V-UHF1> <V-UHF2> <V-UHF3> <V-UHF4> <OUT>
<FM> <AUX> <MORE OPTIONS>
Using
◀▶
we will scroll through this first menu line.
Using
▲
we go backwards.
Equipment configuration:
<UHF4 MODE>
VHF-UHF or DAB
UHF4 input configuration as
VHF-UHF
or
DAB
.
Press OK to access this menu. Using
◀▶
select correct parameter
and confirm using OK
<DC PASS: 12v>
1:- 2:- 3:- 4:-
Voltage configuration for pre-amplifiers.
Press OK to enter, and
◀▶
to select voltage, 12V or 24V. OK to
accept. Then select in which UHF input, 1:- 2:- 3:- 4:-, do we need
