MONZUN M2, M3
NP-M2-M3-5_07-2016
- 2 -
07/2016
IMPORTANT INFORMATION
1. TECHNICAL DATA
MONZUN M2 / M2.1 MONZUN M3 / M3.1
Nominal voltage / frequency:
230 V ± 10%, 50 - 60 Hz
Rated power:
30 VA
Quantity of dry
air at 5 bar:
up to 280 l/min
up to 140 l/min
Working pressure:
5-7 bar
6-8 bar
8-10 bar
Drying performance:
Atmospheric dew point -20°C
Timer settings:
wiring diagram ! **
Weight:
20 kg / 21.5 kg
18 kg / 19 kg
Dimensions in mm (w x d x h): Mx
520 x 200 x 540
440 x 175 x 510
Mx.1
520 x 230 x 580
440 x 230 x 510
Time to fill air tank from 0 to 0.6 MPa:
DK50 2V/M3
-
90 s.*
DK50 2V/50/M3
-
180 s.*
DK50 2V/110/M2
380 s.*
-
DK50 2x2V/110/M2
200 s.*
-
* Strictly reference data
**
If air demand is too low when and the time to fill the air tank is less than double of time KT1 (wiring
diagram), the dryer may fail due to regeneration chamber imbalance. In this case the timer settings
must be changed to a lower setting (50s) and contact the manufacturer!
Required drying performance can only be achieved when following the defined operating
conditions!
Drying performance will decline and the achieved dew point will drop if the dryer is
operated at any pressure below the minimum working pressure!
Dryer operation at a pressure of 0.5 Bar below the minimum working pressure can lower
the dew point at the outlet by more than 10°C!
Drying performance will decline and the achieved dew point will drop if the dryer is
operated at any temperature above the maximum working temperature!
2. PRODUCT DESCRIPTION
MONZUN M2/ M2.1 and MONZUN M3/ M3.1 adsorption air dryers are intended for drying compressed oil-
free air from compressors used in dental equipment in dental offices and laboratories.
The MONZUN M2 adsorption dryer is designed for installation on appropriate EKOM compressors.
MONZUN M2/ M2.1 and MONZUN M3/ M3.1 dryers are adapted for wall-mounted installation and
connection to oil-free EKOM compressors and to compressors from other manufacturers.
Содержание MONZUN M2
Страница 1: ......
Страница 27: ...MONZUN M2 M3 ...