EKOM DO 2.1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 61

DO 2.1
DO 2.1-10
NP-DO2.1_5_06-2012 - 12 - 06/2012
IMPORTANT INFORMATION
1. CE MARKING
Products labeled with the compliance mark CE meet safety Guidelines of the European Union MDD
93/42/EEC.
2. WARNINGS
2.1. General warnings

The installation, operation and maintenance manual is an integral part of the appliance and must be kept
with it. Exact observance of this manual is the prerequisite of the correct use and operation according to
model.

For the safety of operating personnel and trouble-free operation of the appliance, we strongly advise the
use and fitting of original parts and accessories mentioned in the technical documentation, as these, are
approved by the manufacturer.

If any other accessories or consumable materials are used, the manufacturer cannot be held responsible
for the safe operation of the appliance or safety of the operating personnel.

The warranty does not cover damages that originate from the use of accessories or consumable materials
other than those specified or suggested by the manufacturer.

The manufacturer becomes responsible for the reliability and function only if:
-
Installation, new settings, amendments, extensions and repairs are performed by the manufacturer or his
representative, or a service company approved by the manufacturer,
-
The appliance is used in accordance with the installation, operation and maintenance manual.

After its printing, the installation, operation and maintenance manual corresponds with the version of the
appliance and the country according to the relevant safety and technical standards. All wiring-diagrams,
methods and names in the manual are strictly copyright. They may not be reproduced in any way without
prior permission of the manufacturer.
2.2. General safety warnings
The manufacturer has designed and developed the appliance so that damages are avoided when the
chosen model is used for its correct intended purpose. Please take note of the following safety measures
to avoid accidents, injury and damages.

When operating the appliance, it is important to respect the laws and regional valid regulations at the place
of use. The users of our equipment are responsible for the observance of all the regulations within the UK.

Original packaging should be kept for the return of the appliance. Only original packaging ensures optimal
protection during transport. If it is necessary to return the appliance during the warranty period, the
manufacturer is not liable for damages caused by improper packaging.

Before using the appliance everyday, it is important that the user convince him/herself on the due function
and safe condition of the appliance and all equipment connected to it.

The user must fully familiarise him/herself with the workings of the appliance.

Whilst the appliance is in operation, and a technical failure occurs, the user is obliged to inform their
supplier immediately.

The appliance is not designed for operation in areas where explosive gases and flammable liquids are
present.
2.3. Safety warnings on protection against electrical current

This appliance must be connected to earth.

Prior to connection of the appliance to the power supply, check that the voltage and frequency stated on
the appliance are correct.

Prior to switching on, check for possible damage to the appliance, suction/exhaust pipe-work system,
pneumatic and electrical system. Replacing any damaged parts or wires immediately.

Immediately disconnect the appliance from the power supply (remove the plug) if a technical failure occurs.

Before commencing any repairs and/or maintenance, ensure that:
- Mains plug is removed from the socket

The appliance can only be installed by an approved qualified engineer.