EKKO EP30A, Руководство пользователя

Страница: 24 / 32

19
switch at po sition “0”.When replace or install the accumulator, make sure the accumulator is
fixed securely in battery box.
9.4.6 Storage, transportation and installation of the accumulator
The device must be parked on the level ground steadily. To prevent short circuit, naked
cable ends and the terminal posts should be covered with insulated covers. When pulling out
the accumulator, properly arrange removed accumulator's connectors and cables without
blocking access of the accumulator.
9.4.7 Battery power indicator
Battery power display table: ten articles showing represent 100% of the battery. With the
consumption of battery capacity, the glowing article shows will be from top to down.
The color of LED show the different states :
Name LED Color Parameter value
The standard battery
remaining power
Green 70-100%
Orange 30-60%
Red blinking 0-20%
Battery discharge on 70%,red lamp will be blinking “Energy storage”.
Battery discharge on 80%,two lamps will blinking “run out of battery”, Need to charge the
accumulator.
Fully charged Need to be charged Out of power
9.4.8 Charging
Read the instruction manual carefully before recharging.
The batteries should be recharged in well-ventilated areas. Make sure no metal objects
placed on the accumulator. Check all cables connection and connectors for obvious defects.
Observe strictly all safety instructions, e.g. replenishment of the accumulator and
preparation for recharging.