EKKO EP30A, Руководство пользователя

Страница: 23 / 32

18
9) During recharging or using, the liquid level of electrolyte lowers because of water
evaporation, so pure water should be added.
10) If individual cell fails, identify the cause and repair the cell immediately. Replace the cell
when it cannot be repaired.
11) The site for recharging should be well ventilated. It is prohibited to smoke or use open
fire, avoiding the risk of hydrogen explosion.
12) The electrolyte in accumulator is toxic and corrosive. For this reason, always wear
working suit and protection glasses to protect your body from contacting the electrolyte in
accumulator.
13) If your clothes, skin or eyes are spilled with acid liquid in accumulator, flush with large
amount of clean water. For skin and eyes, flush with large amount of clean water and also
seek doc
tor’s treatment immediately. Acid spillage must be neutralized and treated
immediately.
14) The weight and dimensions of the accumulator have remarkable effect on stability of the
truck. Therefore, do not modify the type of accumulator without approval from the
manufacturer.
15) Never discharge in large current, for example, performs travelling and lifting
simultaneously.
9.4.4 Disposal of used batteries.
Scrap battery must be carried out in accordance with the relevant laws and regulations in
region recycling, storage provisions stipulated by the environmental protection area or
waste treatment area, and the work must be conducted by qualified professional company.
9.4.5
Specification of the accumulator
Battery Charger
Rated Voltage
： 24V
Rated Capacity
： 280Ah
Input
：
195/265VAC
50/60Hz
Output
：
DC24V40A
Uninsulated terminal poles on the accumulator should be protected with an insulated cover.
When connecting the accumulator and socket, make sure to stop the device and put the