background image

5

Warning! 

Incorrect disposal of this product may 

cause serious damage to the environment and hu-

man health. Please be informed about the correct 

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

!

Local commands

Available functions: 
N.O. pushbutton with memory / N.O. pushbutton without memory.

Light dimming by following the selected regulation 
curve and by keeping the color temperature constant. 
Soft start with 200ms fade time. Soft switch-off with 
a fade time of 1s.

• 

Click: Switch ON / OFF

• 

Double Click: max. intensity (100%)

• 

Long press (>1s) while OFF: switch ON at 1% 
(Night function)

• 

Long press (>1s) while ON: Dimming UP / 
DOWN

Available functions: 0-10V / 1-10V / potentiometer.

Light dimming by following the selected regulation 
curve and by keeping the color temperature constant.
Min. intensity = 0,1%

• 

< 1 V: load OFF

• 

10 V: max. intensity

Dimensions [mm]

108

91.00

36

62

108

91.00

36

62

Marks

•  CE: the device complies with the Electromagnetic 

Compatibility Directive (2014/30/EU) and the RoHS 2 

Directive (2011/65/UE).

•  Reference Standards:  EN 

61347-1:2008+A1:2011+A2:2013, EN 61000:2014-

3.2, EN 61000:2013-3.3, EN 62384:2006+A1:2009, 

EN 55015:2013+A1:2015 , EN 61547:2009, EN 

50581:2012

Maintenance

The device is maintenance-free. To clean use a dry cloth. 

It must be avoided the use of solvents or other aggressive 

substances.

Disposal

At the end of its useful life the product 

described in this datasheet is classified 

as waste from electronic equipment in 

accordance with the European Directive 

2012/19/EU (WEEE recast), and cannot 

be disposed together with the municipal 

undifferentiated solid waste.

Warnings

• 

Installation,  electrical  connection,  configuration  and 

commissioning of the device can only be carried out by 

qualified  personnel  in  compliance  with  the  applicable 

technical standards and laws of the respective countri-

es

•  Opening the housing of the device causes the imme-

diate end of the warranty period

•  In case of tampering, the compliance with the essential 

requirements of the applicable directives, for which the 

device has been certified, is no longer guaranteed 

Содержание EK-GH1-DL







Отзывы: