Ekin Endustriyel GemmeCotti HTM 10 PP, Руководство пользователя, Страница: 7 / 28

2
Preliminary Remarks
All the references to the pumps have to be considered applicable also to systems that use these
pumps unless it’s specified otherwise.
2.1 Safety General Warnings
1
2.1.1 Introduction About Danger
1.5 Explosive Atmosphere Zones
HTM PP/PVDF pumps CANNOT be used in explosive atmospheres. These uses require special
pumps that GemmeCotti manufactures with particular materials and precautions. Customers who
want to use special pumps in these kind of zones have to contact the Ekin Endüstriyel technical
office for the correct choice of the product. The pumps, manufactured by GemmeCotti, for these
kind of applications belong to the series EM-C or EM-T or EM-P. Pump model EM-C, EM-T e EM-P
in PP or PVDF can be used only for Atex zone2, II3G. Please refer to paragraph 2.7.1 for further
instructions.
We remind you that the classification of the zone (Ref. Atex 2014/34/EU former 94/9/CE
directive) for potentially explosive atmoshpere zones have to be done by the customer
and communicated to GemmeCotti for the right choice of the kind of pump suitable to
work in these zones.
Furthermore, the customer is responsible of the correct installation of the pump in accordance
with the requirements stated in the directive.
2. INSTALLATION
The non-observance of the indications stated in this manual or the inappropriate use of
the equipment by unqualified or unauthorized staff, can cause serious personal injuries
or death and damages to products and apparatus!
1 If these warnings are not observed the certification and the warranty of the pump can be invalidated.
2.1.2 Indications of Danger
For the safety of those in charge of the installation of the pump it’s necessary to use
safety clothing and individual safety devices approved by the current provisions of the
law (e.g. safety glass, gloves and safety insulating-shoes)