EKF SC1-ALLEGRO, Руководство пользователя

Страница: 55 / 83

User Guide • SC1-ALLEGRO •
CompactPCI ® Serial
CPU Board • Intel® i7-3xxx Processor
Loading UEFI BIOS Setup Defaults (P-GP)
The jumper P-GP may be used to reset the UEFI BIOS configuration settings to a default state. The
UEFI BIOS on SC1-ALLEGRO stores most of its settings in an area within the BIOS flash, e.g. the actual
boot devices. Using the jumper P-GP is only necessary, if it is not possible to enter the setup of the
BIOS. To reset the settings mount a jumper on P-GP and perform a system reset. As long as the
jumper is stuffed the BIOS will use the default configuration values after any system reset. To get
normal operation again, the jumper has to be removed.
P-GP Function
Jumper Removed
1)
Normal operation
Jumper Installed BIOS configuration reset performed
1)
This setting is the factory default
Manufacturer Mode Jumper (P-MFG)
The jumper P-MFG is used to bring the board into the manufacturer mode. This is necessary only on
board production time and should not used by customers. For normal operation the jumper should
be removed. The pin header P-MFG is not stuffed on the SC1-ALLEGRO by default.
P-MFG Function
Jumper Removed
1)
Normal operation
Jumper Installed Entering Manufacturer Mode
1)
This setting is the factory default
1
P-GP
1
P-MFG
© EKF -55- ekf.com