EKF PC7-FESTIVAL, Руководство пользователя

Страница: 13 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
Feature Summary
Front I/O (4HP)
<
2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - iAMT, 2 = I210IT)
<
2 x DisplayPort (from processor integrated HD graphics engine, standard DP latching receptacles)
<
2 x USB 3.0
<
Option 2 x Type-C USB 3.1 Gen1 (requires low profile mezzanine expansion card w. front panel I/O)
Additional Front I/O (8HP)
< Option RS-232, USB3, DisplayPort w. PCZ-NVM side card
<
Option quad port 2.5GbE RJ45 jacks w. SCJ-VEENA side card
<
Option 2 x M12-X receptacles for Gigabit Ethernet (P01, as replacement for RJ45)
<
Option RS-232, HD-Audio, USB w. PCU-UPTEMPO side card
< Custom specific front panel and side card design
CompactPCI® PlusIO Backplane Resources
<
PICMG® CompactPCI® 2.0 CPU card & system slot controller for J1 based 32-bit CompactPCI® systems
<
Support for up to seven CompactPCI® peripheral boards, 33/66MHz (PI7C9X112 PCIe® to PCI® bridge)
< PICMG® CompactPCI® 2.30 J2 connector pin assignment according to CompactPCI® PlusIO
< J2 is assigned to 4 x PCIe® Gen2*, 4 x SATA 3G*, and 4 x USB2 ports (all derived from PCH)
<
Option 2 x 2.5GbE* over J2 backplane connector with P82-GBE low profile mezzanine module
<
J2 can be used to enable CompactPCI® Serial peripheral card slots for hybrid systems with a split
backplane
< Hybrid small system racks available (e.g. SRP-BLUBOXX)
<
J2 can be used alternatively for a rear I/O module
<
Custom specific rear I/O module design on request
<
J2 Connector option available - 64-bit system slot tolerant for legacy CompactPCI® 2.0 (Classic)
< Gigabit Ethernet 2 x 2.5GBASE-T option w. P82-GBE low profile mezzanine module
* CompactPCI® PlusIO specifies PCIe® 5GT/s, SATA 3G and GbE 1000BASE-T over J2
© EKF - 13 - ekf.com