EKF PC7-FESTIVAL, Руководство пользователя

Страница: 91 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
Mezzanine Connectors
Up to four connectors are available for PC7-FESTIVAL mezzanine expansion. Two high speed
signal connectors (HSE1, HSE2) and in addition a legacy I/F connector (EXP) are populated on top
of the CPU board. From PCB Rev.3 off, there is an optional GBE mezzanine connector for use with
the P82-GBE low profile module.
EKF offers low profile mezzanine modules which fit into the 4HP envelope of the CPU carrier card,
with varying B2B clearance from 9.5mm to 10.8mm, and also side cards for additional 4HP
mounting pitch (8HP in total assembly, 18.7mm B2B). The female connector EXP is identically
populated on carrier and mezzanine and requires a suitable pin header (stacker) as contact
element between carrier and mezzanine in addition. The HSE1/HSE2 connectors of carrier and
mezzanine are female (CPU) and male (mezzanine) pairs, selected to match the individual B2B
height requirements:
HSE1/HSE2 Mezzanine Connectors
Mezzanine Series, B2B Connector
CPU Carrier 8mm female ERNI Microspeed 275.90.08.068.01
C4*, B2B 9.5mm Supplement 1mm male connector for nominal height 9mm
P82, S2*, S4*, B2B 10.0mm Supplement 2mm male connector for nominal height 10mm
S6*, S8*, B2B 10.8mm Supplement 2mm male connector for nominal height 10mm
PC*, SC* side card, B2B 18.7mm Supplement 8mm male connector for nominal height 18mm
© EKF - 91 - ekf.com