PC6-TANGO • CompactPCI
®
PlusIO • Intel® Atom™ E39xx Processor (APL-I SoC)
HSE
EXP
Intel®
APL
Atom™
PC -
6 TANGO
PC6-TANGO EKF ekf.com
• ©
•
J2
UHM
J2
UHM
Dual
GbE
P-USB
P-ETH
J-POW
+5V
P-FPH
P-DP1
J-GP
P-DP2
DP1
DP2
2 x
USB
3.0
© EKF
ekf.com
+
J-RTC
CFast Socket
™
Power Terminal Block
This option is provided for professional system integrators only
For stand-alone applications, the J1 backplane connector can be replaced on request by a two-circuit
terminal block, suitable for attachment (screw connection) of stranded wires up to 1mm
2
. The power
supply must p5V according to the CompactPCI® specification (+5%/-3%, <50mVpp ripple).
The PC6-TANGO may or may not be equipped with the backplane connector J2 for stand-alone
operation (option rear I/O module via J2). Note that in this configuration the platform reset signal is
missing (located on J1 pin C5). Using an adapted programming of the PLD on PC6-TANGO could solve
this problem. Please discuss your needs with [email protected] before ordering.
CAUTION: The PC6-TANGO is not equipped with a protection circuitry against inverted wires. A
mistake will inevitably destroy the board caused by the interchanged polarity. Be extremely careful
while installation.
© EKF -84- ekf.com