eKey home CP micro 1, Руководство по эксплуатации

Страница: 60 / 64

en │ 59
The process of resetting to the default settings is initiated via the digital
input.
Step Description
1st Disconnect the ekey home CP micro 1 from the mains supply.
2nd Press and hold the request-to-exit button or short-circuit the pins
for the digital input and keep them in this state.
3rd Connect the ekey home CP micro 1 to the mains supply.
4th Keep the request-to-exit button held down or keep the pins for
the digital input short-circuited for at least 5 sec.
5th
Release the request-to-exit button or remove the short-circuit.
Within 5 sec, press and hold the request-to-exit button or short-
circuit the pins for the digital input for at least 500 ms.
The system was reset to the default settings. You can now recommission
the system.
See “ Configuration of normal mode and usage of the finger scanner with
administrator fingers ”, p age 29.
See “ Configuration of normal mode and usage of the finger scanner with
the app ”, page 19.
See “ Configuration of normal mode and usage of the code pad with
shortcuts ”, page 41.
Updating the software
We are working to improve our products and add new functions all the
time. Correspondingly, updates are made available for the registration
unit and control panel software. More information about this can be
obtained from your dealer.
Via the digital
input (
ekey
home control
panel micro 1
only)