eKey home CP micro 1, Руководство по эксплуатации

Страница: 49 / 64

48 │ en
4 predefined modes can be used to set the acoustic and optical signaling
that indicates when a button has been pressed. By default, the acoustic
and optical signals indicating that a button has been pressed are on. Enter
the number of the required mode:
□ 0 = acoustic and optical signals off
□ 1 = acoustic signals on and optical signals off
□ 2 = acoustic signals off and optical signals on
□ 3 = acoustic and optical signals on.
The signaling to indicate that a button has been pressed is set via the
Admin menu. Enter the admin code to access the Admin menu.
See “ Entering the admin code ”, page 41.
The system is in the Admin menu.
Step Action Description Display
1st
Press 5 , 4 , and the
number of the
required mode. E.g.,
0 for acoustic and
optical signals off.
Status LED lights
up green on the
left.
2nd Press
✓
. Status LEDs light
up green.
Status LEDs light
up red.
Something has been
entered incorrectly.
The signaling was not
changed. Enter the
admin code from the
beginning again. - -
3rd No action
required.
- Status LEDs are
off.
The optical and acoustic signaling to indicate that a button has been
pressed was set. The system is in normal mode.
Setting the
signaling that
indicates when
a button has
been pressed