- 15 -
To make sure the installation of EK components was successful, we
recommend you perform a leak test for 24 hours. When your loop
is complete and filled with coolant, connect the pump to a PSU
outside of your system. Do not connect power to any of the other
components. Turn on the PSU and let the pump run continuously.
It is normal for the coolant level to drop during this process as air
collects in the distribution plate. Inspect all parts of the loop, and
in the eventuality that coolant leaks, fix the issue and repeat the
testing process. Ensure that all hardware is dry before the system is
powered on in order to prevent any damage.
TESTING THE LOOP
Our products are warranted against defects of materials and quality
for a period of 24 months, starting with the date of delivery to the
end-user. During this period, products will be repaired or have parts
replaced at our discretion, provided that 1) the product is returned
to the agent from whom it was purchased; 2) the product has been
purchased by the end-user and has not been used for commercial
purposes; 3) the product has not been misused, handled carelessly,
or used in a manner other than the way described in the instructions
manual. This warranty does not confer rights other than those
expressly set out above and does not cover any claims for
consequential loss or damage. This warranty is offered as an extra
benefit and does not affect your statutory rights as a consumer. This
warranty is voided if the product comes in contact with aggressive
UV additives or other improper liquids. EK water blocks are sealed
with a warranty-voiding circular label, proving the water block has
withstood a pressure leak test. Removing the label will void the
leak-free guarantee, but not the guarantee on the product itself.
Any other RMA issues can be reported to EK Customer Support at
www.ekwb.com/support
for further analysis.
WARRANTY
