- 11 -
STEP 1
If already installed, please remove the motherboard from your
computer and place it on an even surface.
STEP 2
Using a Philips-head screwdriver remove the four UNC 6-32 screws
securing the original plastic hold-down clamps around the socket
as shown in the illustration. Remove the hold-down clamps and
store them away.
STEP 3
Cleaning the CPU:
Wipe the IHS clean using a non-abrasive cloth or
Q-tip as shown in the illustration.
STEP 3
PREPARING THE MOTHERBOARD
UNC 6-32 SCREW
IHS
NON-ABRASIVE CLOTH
HOLD-DOWN
CLAMPS
STEP 2
