- 11 -
For the Mosfet:
Use four (4) M2.5 x 5 AX1 screws with M2.5 PVC washers and tighten
them evenly. The water block installation is now complete.
STEP 2
Attach the I/O cover back on the motherboard.
Do not forget to plug
in the I/O cover LED connector before securing the screws.
M2.5 x 5 AX1 Screw
STEP 2
STEP 3
For the EK-Quantum Momentum ROG Maximus XII Hero monoblock to
operate properly, the G1/4 port nearest to the right edge of the water
block
MUST BE USED AS THE INLET PORT
.
STEP 3
IMPORTANT:
Use this opening
as the Inlet Port!
FOR MOSFET
M2.5 PVC Washer
For this Step, you will need:
Self Adhesive M2.5
PVC Washer (5 pcs)
M2.5 x 5 AX1
Screw (5 pcs)
Phillips Head
Screwdriver
5 mm