Installation / Connection | 2
21
2.5 Adjusting the Screen Angle
Hold the left and right edges of the monitor with both hands, and adjust the screen tilt to the
optimum position for performing tasks.
70°
216.3 mm
401.3 mm
15°
Attention
• After the adjustment is finished, make sure that the cables are correctly connected.
2.6 Mounting the Touch Pen Holder
Mount the touch pen holder in either of the holes to the left and right on the rear side of the
monitor. To mount the holder, use the touch pen holder mounting screw.
2.7 Touch Panel Setup
Connect the USB cable, and after completing installation, run the sensitivity adjustment
software TPOffset.
