background image

 WARNING

If the unit begins to emit smoke, smells like something is burning, or makes strange noises, 

disconnect all power connections immediately and contact your EIZO representative for advice.

Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.

Do not disassemble or modify the unit.

Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing covers may result in fire, electric 
shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet or spillage 

into the cabinet may result in fire, electric shock, or equipment damage. If an object or 
liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by 
a qualified service engineer before using it again.

Place the unit at a sturdy and stable place.

A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, 

disconnect the power immediately and ask your local EIZO representative for advice. Do not continue using 

a damaged unit. Using a damaged unit may result in fire or electric shock.

Use the unit in an appropriate location.

Otherwise, fire, electric shock, or equipment damage may result.

 • Do not place outdoors.

 • Do not place in any form of transportation (ships, aircraft, trains, automobiles, etc.).

 • Do not place in dusty or humid environments.

 • Do not place in locations where water may be splashed on the screen (bathrooms, kitchens, 

etc.)

 • Do not place in locations where steam comes in direct contact with the screen.

 •

Do not place near heat generating devices or humidifiers.

 • Do not place in locations where the product is subject to direct sunlight.

 •

Do not place in environments with inflammable gas.

 •

Do not place in environments with corrosive gases (such as sulfur dioxide, hydrogen sulfide, 

nitrogen dioxide, chlorine, ammonia, and ozone)

 • Do not place in environments with dust, components that accelerate corrosion in the 

atmosphere (such as sodium chloride and sulfur), conductive metals, and so on

To avoid danger of suffocation, keep the plastic packing bags away from babies and children.
Use the enclosed power cord and connect to the standard power outlet in your country.

Be sure to use within the rated voltage of the power cord. Otherwise, fire or electric shock may result.
Power supply: 100-240Vac 50/60Hz

To disconnect the power cord, grasp the plug firmly and pull.

Tugging on the cord may damage and result in fire or electric shock.

The equipment must be connected to a grounded main outlet.

Failure to do so may result in fire or electric shock.

Use the correct voltage.

 •

The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this 

“Instructions for Use” may cause fire, electric shock, or equipment damage.

 

Power supply: 100-240Vac 50/60Hz

 •

Do not overload your power circuit, as this may result in fire or electric shock.

4

PRECAUTIONS

Содержание RadiForce RX370

































Отзывы: