12
Chapter 1 Introduction
●
Space-saving design
The monitor has two USB upstream ports. You can operate two PCs using one set of USB devices
(mouse, keyboard, etc.).
●
Monitor operation from the mouse and keyboard
Using the RadiCS / RadiCS LE monitor quality control software, you can perform the following
monitor operations using the mouse and keyboard:
• Switching CAL Switch modes
• Switching input signals
•
Function that assigns any CAL Switch mode to a part of the screen and displays an image (Point-
and-Focus)
•
Displaying or hiding the PinP sub window (Hide-and-Seek)
•
Switching PCs used to operate USB devices (Switch-and-Go)
• Entering power saving mode (Backlight Saver)
• A feature that temporarily increases brightness to improve the visibility of diagnostic images (Instant
Backlight Booster)
Note
• The RadiCS / RadiCS LE software allows you to display or hide the PinP sub window and switch the PC
used to operate USB devices at the same time. For more information about the setup procedure, refer to
RadiCS / RadiCS LE User's Manual.
1-2. Package Contents
Check that all of the following items are contained in the package. If any of these are missing or
damaged, contact your dealer or local EIZO representative.
Note
• It is recommended that the box and packing materials be stored so that they can be used to move or transport
this product.
• Monitor
• Power cord
•
Digital signal cable (DisplayPort - DisplayPort):
PP300 x 2
• USB cable: UU300 x 2
•
EIZO LCD Utility Disk (CD-ROM)
• Instructions for Use
