18
Chapter 2 Installation / Connection
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
Insert the power cord fully into the monitor.
3.
Connect the USB cable to the monitor’s USB upstream port and to the
computer’s downstream port respectively.
The cable connection is required when you use RadiCS / RadiCS LE or when you connect a USB
device (USB-connected peripheral device) to the monitor.
USB cable: UU300
Attention
• When connecting the monitor to a PC on which RadiCS / RadiCS LE has been installed, connect the cable
to
.
• Remove the cap before using
.
2-3. Attaching and Removing RadiLight Focus
(Spotlight)
RadiLight Focus (spotlight) is removable.
1
2
To remove it, rotate the area connected to the monitor in the direction as shown at the location 1 in the
figure and pull it out.
To attach, just connect it to the monitor without rotating it. It can be installed in the diagonally downward
direction only.
