Eizo RADIFORCE MS230W, Руководство пользователя

Страница: 32 / 58

32
Chapter5Troubleshooting
Imaging problems (for both digital and analog)
Problem Possible cause and remedy
3. The screen is too bright or too dark. • Use<Brightness>or<Contrast>intheAdjustment
menutoadjustit.(TheLCDmonitorbacklighthasa
limitedlifespan.Whenthescreenbecomesdarkor
beginstoflicker,contactyourlocaldealer.)
• TurnontheAutoEcoViewfunction.Themonitor
detectstheenvironmentalbrightnesstoadjustthe
screenbrightnessautomatically.
4. Characters are blurred. • CheckwhetherthePCisconfiguredtomeetthe
resolutionandverticalscanfrequencyrequirements
ofthemonitor(referto“CompatibleResolutions/
Frequencies”intheSetupManual.).
• Use<Smoothing>intheAdjustmentmenutoadjustit
(see “Tomodifyblurredcharacters/lines<Smoothing>”
(page14) ).
5. Afterimages appear. • AfterimagesareparticulartoLCDmonitors.Avoid
displayingthesameimageforalongtime.
• Usethescreensaverorpowersavefunctiontoavoid
displayingthesameimageforextendedperiodsof
time.
6. Green/red/blue/white dots or defective
dots remain on the screen.
• ThisisduetoLCDpanelcharacteristicsandisnota
failure.
7. Interference patterns or pressure marks
remain on the screen.
• Leavethemonitorwithawhiteorblackscreen.The
symptommaydisappear.
8. Noise appears on the screen. • IntheAdjustmentmenu,set<Overdrive>to“Off”(see
“Tosetoverdriveintensity<Overdrive>”(page19) ).
• WhenenteringthesignalsofHDCPsystem,the
normalimagesmaynotbedisplayedimmediately.
Imaging problems (for analog only)
Problem Possible cause and remedy
9. Display position is incorrect. • Use<Position>intheAdjustmentmenutocorrectthe
imageposition(see “Tocorrectthescreenposition
<Position>”(page13) ).
• Iftheproblempersists,usethegraphicsboard’sutility
ifavailabletochangethedisplayposition.
10. Vertical bars appear on the screen or a
part of the image is flickering.
• Use<Clock>intheAdjustmentmenutoadjustit(see
“Toeliminateverticalbars<Clock>”(page12) ).
11. Whole screen is flickering or blurring. • Use<Phase>intheAdjustmentmenutoadjustit(see
“Toremoveflickeringorblurring<Phase>”(page13) ).