Eizo RADIFORCE MS230W, Руководство пользователя

Страница: 11 / 58

11
Chapter2AdjustingScreens
2-2. Displaying Screen Correctly
●
Digital Signal Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if
characters and/or lines appear blurred, go to
“6. Modify blurred characters or lines.” (page 14) .
When performing more advanced adjustment, see “2-3. Adjusting Color” (page 15) and subsequent pages.
●
Analog Signal Input
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of 800 ×
600 (SVGA).
The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and
screen size correctly according to the PC to be used.
Note
• The Self Adjust function works when all of the following conditions are satisfied:
- When a signal is input into the monitor for the first time or when a resolution or vertical/horizontal scan frequency
not used before is set
If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
Setting Procedures
1.
Perform the auto adjustment.
●
To adjust flickering, screen position, and screen size automatically <Screen>
Procedure
1. Choose <Auto Adjustment> from the Adjustment menu, and press .
2. Choose <Screen> from the <Auto Adjustment> menu, and press .
The <Auto Adjustment> menu appears.
3. Select <Execute> with or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Attention
• This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does
not work properly when an image is displayed only on a part of the screen (command prompt window, for example)
or when a black background (wallpaper, etc.) is in use.
• This function does not work correctly with some graphics boards.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming “1.Performtheautoadjustment.”(page11) ,
performtheadjustmentsaccordingtotheproceduresonthefollowingpages.Ifthescreenisdisplayed
correctly,goto
“5.Adjustingcolorgradation.”(page14) .