22
Chapter5PowerSavingFunctions
5-3. Setting the power saving mode when a person
leaves the monitor
The sensor on the front side of the monitor detects the movement of a person by setting a value from “Level-1” to
“Level-4” of the Presence Sensor function. When a person moves away from the monitor, it shifts to the power
saving mode automatically and does not display the images on the screen to reduce the power consumption. When
a person comes near the monitor again, it comes back from the power saving mode and displays the images. The
detection level of the Presence Sensor can be changed according to the environment of usage.
Note
• At the time of shifting to power saving mode, the message that indicates shifting is displayed.
Attention
• This function cannot be used during “RadiCS SelfQC” execution.
• It also cannot be used during the landscape position display.
Procedure
1. Choose “PowerManager” from the Adjustment menu, and press
.
2. Choose “Presence Sensor” from the “PowerManager” menu, and press
.
3. Select “Off” and any of “Level-1”, “Level-2”, “Level-3”, or “Level-4” (sensor detection level) with or .
Detection
level
Detection area
Description
Level-1
90cm(35.4inch)orless
Iftheuserleavesthedetectionarea,themonitorshiftstothe
powersavingmode.Ifthereisastillobjectwithinthedetection
area,humanpresenceisassumed.Thissettingisrecommended
ifthemonitorfrequentlyshiftstothepowersaving,eventhough
auserisinfrontofthescreen.
Level-2
70cm(27.6inch)orless
Level-3
Automaticallyset(to90cm
[35.4inch]orless)
Thedetectionareaissetautomaticallyaccordingtohuman
movement.Iftheuserleavesthisarea,themonitorshiftstothe
powersavingmode.Stillobjectsinthedetectionareawillbe
ignored.
Level-4
Automaticallyset(to70cm
[27.6inch]orless)
4. Press
to exit.
