Eizo FLEXSCAN S1701-X -, Руководство пользователя

Страница: 40 / 53

40
Chapter 5 Reference
5-5 Preset Timing
The following table shows factory preset video timing (for analog signal only).
Mode Dot clock
Frequency
Polarity Horizontal: kHz
Vertical: Hz
VGA 640×480@60Hz 25.2 MHz Horizontal
31.47 Negative
Vertical 59.94 Negative
VGA TEXT 720×400@70Hz 28.3 MHz Horizontal
31.47 Negative
Vertical 70.09 Positive
VESA 640×480@75Hz 31.5 MHz Horizontal
37.50 Negative
Vertical 75.00 Negative
VESA 800×600@60Hz 40.0 MHz Horizontal
37.88 Positive
Vertical 60.32 Positive
VESA 800×600@75Hz 49.5 MHz Horizontal
46.88 Positive
Vertical 75.00 Positive
VESA 1024×768@60Hz 65.0 MHz Horizontal
48.36 Negative
Vertical 60.00 Negative
VESA 1024×768@75Hz 78.8 MHz Horizontal
60.02 Positive
Vertical 75.03 Positive
VESA 1152×864@75Hz 108.0 MHz Horizontal
67.50 Positive
Vertical 75.00 Positive
VESA 1280×960@60Hz 108.0 MHz Horizontal
60.00 Positive
Vertical 60.00 Positive
VESA 1280×1024@60Hz 108.0 MHz Horizontal
63.98 Positive
Vertical 60.02 Positive
VESA 1280×1024@75Hz 135.0 MHz Horizontal
79.98 Positive
Vertical 75.03 Positive
Attention
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.