background image

PRECAUTIONS

 CAUTION

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a problem.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

If you plan to leave the unit unused for an extended period, disconnect the 
power cord from the wall socket after turning off the power switch for the 
safety and the power conservation.

Notice for this monitor

In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a 
monitor in lower brightness is recommended.

The LCD panel is manufactured using high-precision technology. However, note that the appearance of any 
missing pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels : 99.9994% or higher.

The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, 
please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There 
will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the 
screen, it may deteriorate or damage your LCD panel. Leave the screen white or black to decrease the prints.

When  the  screen  image  is  changed  after  displaying  the  same  image  for  extended  periods  of  time,  an 
afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended 
periods of time.

When  the  monitor  is  cold  and  brought  into  a  room  or  the  room  temperature  goes  up  quickly,  dew 
condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until 
dew condensation disappears, otherwise it may cause some damages to it.

Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in 
damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.

To use the monitor comfortably

An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to 
the environmental conditions.

Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

Содержание FlexScan MX300W

































Отзывы: