background image

SAFETY SYMBOLS

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and can 
be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate injury and/or 
propertyor product damage.

Indicates a prohibited action.

Indicates to ground for safety.

Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be 
reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, 
mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information 
confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt 
of said information. Although every effort has been made to ensure that this manual provides up-to-date 
information, please note that EIZO monitor specifications are subject to change without notice.

Macintosh is registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager and RadiCS are trademarks of EIZO NANAO CORPORATION.
ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION

Product specifications may vary depending on the region.  
Confirm the specifications in the manual written in the language of the region of purchase.

•  It shall be assured that the final system is in compliance to IEC60601-1-1 requirement.
•   Power  supplied  equipment  can  emit  electromagnetic  waves,  that  could  influence,  limit  or  result  in 

malfunction of the monitor. 

  Install the equipment in a controlled environment, where such effects are avoided.
•  This is a monitor intended for use in a medical image system.

Содержание FlexScan MX300W

































Отзывы: