Eizo FlexScan L578, Руководство пользователя

Страница: 35 / 53

●
Whenever an error signal message appears, the signal
frequency will be displayed in red.
(Example)
●
Use the graphics board's utility
software to change the frequency
setting. (Refer to the manual of the
graphics board.)
3. Display position is incorrect.
●
Adjust the image position using the
<
Position >.
●
If the problem persists, use the
graphics board's utility software to
change the display position if available.
4. Vertical bars of distortion appear.
●
Decrease the vertical bars using the
<
Clock >.
5. Horizontal bars of distortion appear.
●
Decrease the horizontal bars using the
<
Phase >.
6. Letters and lines appear blurred.
●
Adjust the blurred lines using
<
Smoothing >.
7. The screen is too bright or too dark.
●
Adjust the < Brightness > (The
backlight of the LCD monitor has a
fixed life span. When the screen
becomes dark or begins to flicker,
please contact your dealer.).
8. Afterimages appear.
●
Do you use the screen saver or timer
when displaying the same image for
extended periods of time?
●
Afterimages are particular to LCD
monitors. Avoid displaying the same
image for extended periods of time.
9. The screen has defective pixels (e.g. slightly light or
dark).
●
This is due to the characteristics of the
panel itself, and not the LCD product.
10. Fingerprints remain on the screen.
●
Leaving the screen white may solve
the problem.