Eizo FlexScan EV2785, Руководство пользователя

Страница: 21 / 42

Function
Setting
Range
Description
Advanced
Settings Overdrive Enhanced
Standard
Off
This function allows you to set the overdrive intensity based on the
use of the monitor.
Image lag can be reduced by using the “Enhanced” setting when
displaying moving images.
Hue -50 to 50 Adjust the hue.
Note
• Using this function may prevent some color gradations from being
able to be displayed.
Saturation -50 to 50 Adjust the color saturation.
Note
• Using this function may prevent some color gradations from being
able to be displayed.
• The minimum value (-50) changes the screen to monochrome.
Gain 0 to 100 The brightness of each red, green, and blue color component is
referred to as “Gain”. The hue of “white” can be changed by adjusting
the gain.
Note
• Using this function may prevent some color gradations from being
able to be displayed.
• The gain value changes according to the color temperature.
• When the gain is changed, the color temperature setting changes
to “Off”.
Reset - Reset any color adjustments for the currently selected color mode
back to the default settings.
●
Signal Settings
Set the method for outputting the signal input from the PC to the monitor.
Function Setting Range Description
Window Selection Left
Right Select the application range for the signal settings.
When using PbyP display, select this range first.
• “Left”
The setting is applied to the left screen.
• “Right”
The setting is applied to the right screen.
Note
• Enabled only during PbyP display.
• For details on PbyP, see “2-2. Switching Input Signals” (page
13) .
21
Chapter 3 Advanced Adjustment / Setting