1 | Introduction
10
1.2.2 Rear
5
4
3
5
8
9
12
11
10
2
1
7
6
1. Handle
This handle is used for transportation.
2. Security lock slot
Complies with Kensington’s MicroSaver security system.
3. Lock button
Use this button to remove the monitor from the stand.
4. Headphone jack
Connects to headphones.
5. USB-A connector
(downstream)
Connects to a peripheral USB device (see
).
6. Cable holder
Holds the monitor cables.
7. Stand
*1
Adjusts the height and angle (tilt and swivel) of the monitor. The
monitor can also be rotated vertically.
8. Main power switch
Turns the main power on or off.
: On
: Off
9. Power connector
Connects the power cord.
10. HDMI connector
Connects to a PC with HDMI output.
11. DisplayPort connector
Connects to a PC with DisplayPort output.
12. USB-C connector
(upstream)
Connects to a PC with USB-C output. This also transmits the USB
signal that is necessary for using software that requires USB
connection.
*1
An optional arm (or optional stand) can be attached by removing the stand section.