Eizo eClient SX1, Руководство пользователя

Страница: 9 / 43

2. CONNECTION the eClient
SX1
This chapter explains how to connect the SX1 to a WTS.
2-1. Setting up the SX1
Please observe the following cautions when connecting the SX1.
WARNING
Place the eClient SX1 on a strong, stable surface.
A unit placed on an inadequate surface may fall, resulting in injury
or equipment damage. If the unit falls, disconnect the power
immediately and have the unit checked by a qualified service
engineer before using it again. Using a unit after it has been
dropped may result in fire or electric shock.
OK
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment
damage.
*
Do not place outdoors.
*
Do not place in the transportation system (ship, aircraft, trains,
automobiles, etc.)
*
Do not place in a dusty or humid environment.
*
Do not place in a location where the steam comes directly on the
screen.
*
Do not place near heat generating devices or a humidifier.
The Monitor Attachment Unit supports only EIZO L767, L567,
L557, L367.
Mounting other monitors to the unit may result in injury or
equipment damage. Contact your system administrator for details
of the attachment.
*
The illustrated monitors in this section are L567. Monitors
are not included in the package.
Maximum load capacity of AC outlet is 2 A .
Connecting unit with more than 2 A may result in fire, electric
shock or other damage.
2. CONNECTION the eClient SX1
9