Eizo eClient SX1, Руководство пользователя

Страница: 39 / 43

5. TROUBLESHOOTING
This page presents problem that can be corrected by the user. If a problem persists even
after applying the suggested remedies, contact an EIZO dealer.
Problems Points to check with possible solutions
1. No picture is displayed on the screen
(The power indicator is off).
Check if the power is OFF.
2. No picture is displayed on the screen
(The power indicator is blue).
Check if the power of the monitor is OFF.
Check brightness setting. Minimum settings
will cause screen to be blank.
Try pressing a key on the keyboard, or clicking
the mouse. (The monitor may be in a power
saving mode.)
3. No picture is displayed on the screen
(The power indicator is blue), and
the screen doesn’t return by
operating the keyboard or mouse.
Check if the cable of the keyboard or the mouse
is securely connected.
Check if the [System standby], which is the
power save setting (refer to P.xx). In this case,
the SX1 state is the system standby, which is
disconnected to WTS. Press the power button
to return the screen (it takes over 10 seconds to
return the screen).
Did you select “Stand by” from the [Shut Down
Windows] when you shut down the SX1? (Refer
to P.23). In this case, the SX1 state is the system
standby, which is disconnected to WTS. Press
the power button to return the screen (it takes
over 10 seconds to return the screen).
4. Input devices (such as a keyboard or
a mouse) do not work properly.
Check if the cable of the keyboard or the mouse
is securely connected.
Check if the keyboard or the mouse is
connected to the proper connector.
5. TROUBLESHOOTING
39