Eizo eClient SX1, Руководство пользователя

Страница: 12 / 43

Connecting the signal cable and power cables
3.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the DVI-I
connector of the SX1
4.
After connecting, secure the connection with the screw-in fasteners.
5.
Plug the power cord (50 cm), included into the package, into the
power connector on the rear of the monitor and the other end of the
cable into the power connector (AC outlet) of the eCleint, or into a
power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
Maximum load capacity of AC outlet is 2 A .
Connecting unit with more than 2 A may result in fire, electric
shock or other damage.
Power Supply Control Switch (POWER SYNC)
When the monitor's power cord is connected to the AC output power supply of
SC1/SX1, the monitor’s power supply can be linked with on/off of SC1/SX1. Choose
ON from the power supply control switch (POWER SYNC).
When the power button of SC1/SX1 is turned on or off…
Power Supply Control Switch
(POWER SYNC) Power supply for the monitor
ON The monitor’s power supply is linked, and it turns on or
off simultaneously.
OFF (default) Since the monitor’s power supply is not linked, please
turn the monitor's power supply on or off independently.
12
2. CONNECTION the eClient SX1