Eizo eClient SC1, Руководство пользователя

Страница: 14 / 63

9.
The switch box is connected to the attached connector on the SC1 if
needed.
The secondary power switch makes it easy to turn the SC1 on and off when
stowed away under the desk or out of reach. When the switch box is connected to
the connector, it can be used as a power button. The power button on the SC1 can
be used simultaneously even if the switch box is connected.
10.
If using other devices, please connect them to the appropriate
connectors.
11.
Plug the power cord into the power connector.
If the power cord is connected to a power supply wall socket, regardless of ON or
OFF operation of the power button, the SC1 will starts up.
NOTICE
•
Note that the SC1 also starts up whenever electric power is intercepted from
power failure or master power shutdown, and power supply is restored after
that.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
NOTE
•
The screen, which SC1 can display, is as follows.
Analog Output Digital Output
8 bbp 8 bbp
16 bbp 16 bbp
640 x 480 @60 Hz
32 bbp
640 x 480 @60 Hz
32 bbp
8 bbp 8 bbp
16 bbp 16 bbp
800 x 600 @60 Hz
32 bbp
800 x 600 @60 Hz
32 bbp
8 bbp 8 bbp
16 bbp 16 bbp
1024 x 768 @60 Hz
32 bbp
1024 x 768 @60 Hz
32 bbp
8 bbp 8 bbp
16 bbp 16 bbp
1280 x 1024 @60 Hz
32 bbp
1280 x 1024 @60 Hz
32 bbp
14
2. CONNECTING the eClient SC1