Eizo DuraVision FDX1502T, Руководство пользователя

Страница: 9 / 24

Setting
Value
Description
Brightness 0 to 100 The screen brightness is adjusted by changing the brightness of the
backlight (light source from the LCD back panel).
Temperature Off
4000 K to
10000 K (in
increments of
500 K. 9300 K
is included.)
Adjust the color temperature.
The color temperature is normally used to express the hue of "White"
and/or "Black" with a numerical value. The value is expressed in
degrees "K" (Kelvin).
The screen becomes reddish at low color temperatures and bluish at
high color temperatures, similar to the temperatures of a flame. A gain
preset value is set for each color temperature setting value.
Note
• The value shown in "K" is available only as a reference.
• "Gain" allows you to perform more advanced adjustment.
• If set to "Off", the image is displayed in the preset color of the
LCD panel (Gain: 100 for each RGB channel).
• When the gain is changed, the color temperature setting changes
to "Off".
Gamma 1.8
2.0
2.2
Adjust the gamma.
While the brightness of the monitor varies depending on the video
level of the input signal, the variation rate is not directly proportional
to the input signal. Maintaining the balance between the input signal
and brightness of the monitor is referred to as "Gamma correction".
Note
• If "sRGB" is selected for the color mode, "sRGB" is displayed for
the gamma value.
Advanced
Settings
Hue -50 to 50 Adjust the hue.
Note
• Using this function may prevent some color gradations from being
able to be displayed.
Saturation -50 to 50 Adjust the color saturation.
Note
• Using this function may prevent some color gradations from being
able to be displayed.
• The minimum value (-50) changes the screen to monochrome.
Gain 0 to 100 The brightness of each red, green, and blue color component is
referred to as "Gain". The hue of "white" can be changed by adjusting
the gain.
Note
• Using this function may prevent some color gradations from being
able to be displayed.
• The gain value changes according to the color temperature.
• When the gain is changed, the color temperature setting changes
to "Off".
Reset - Reset any color adjustments for the currently selected color mode
back to the default settings.
9
Chapter 3 Advanced Adjustment / Setting