Eion LibraPlus 5845, Руководство пользователя, Страница: 82 / 140

Example 4.42. Deleting an IP address
To delete a specific IP address from the secondaries, pass it as an argument:
EION: interface Wireless 0 ip address 10.0.0.1
Device 'Wireless 0' address 10.0.0.1 netmask 255.0.0.0.
EION: interface Wireless 0 ip address 192.168.1.10 secondary
Secondary IP 192.168.1.10 with netmask 255.255.255.0 was added.
EION: interface Wireless 0 ip address 192.168.2.10 secondary
Secondary IP 192.168.2.10 with netmask 255.255.255.0 was added.
EION: interface Wireless 0 no ip address 192.168.1.10
Secondary IP '192.168.1.10' was removed.
EION: show interfaces
Wireless 0 is up
Hardware address: 0002.6f23.138c
Internet address: 10.0.0.1 mask 255.0.0.0
broadcast: 10.255.255.255, MTU: 1500
Secondary address: 192.168.2.10 255.255.255.0
Type: station, SSID: "test", Mode: 802.11a
Speed: 0 Mb/s (auto), Access point: Not associated
Channel: 16, Frequency: 5080 MHz, Tx-power: 27 dBm
RTS: off, Distance: 300, WDS: off, FastFrame: on
Burst: on, Compression: off, WMM: on, Beacon: 0
Antenna: auto, IEEE 802.11a Protection: none
FastEthernet 0 is up
Hardware address: 0003.42df.32ac
Internet address: 192.168.0.5 mask 255.255.255.0
broadcast: 192.168.0.255, MTU: 1500
Example 4.43. Deleting all IP addresses
All secondary addresses get erased if the main address is gone:
EION: interface Wireless 0 no ip address 10.0.0.1
All IP addresses of 'Wireless 0' were cleared.
4.6.1.2. Dynamic (DHCP) IP address
LibraPlus supports dynamic IP addresses on network interfaces. It uses a DHCP protocol for this pur-
pose. The DHCP client can be started or stopped using the following command:
interface { name } { index } ip dhcp
Description. Start a DHCP client on a network interface. It's not allowed to have a DHCP
client on a subinterface.
No-Form. Stop a DHCP client.
Arguments. No arguments.
Example.
72
Configuration