7
GB
On the back of the base for rough surfaces there is
also a permanent magnet so that the base can also
be fastened to magnetizable surfaces.
Important! Do not grip the back of the base for
rough surfaces when the control and lock
buttons are pressed.
Risk of injury!
Important! The base for rough surfaces is
suitable only for soft wood, walls made of
plasterboard and similar materials, and
magnetizable surfaces. Do not use the base on
any other surfaces!
7. Maintenance and cleaning
Keep the unit dry and clean at all times. Use a soft,
damp rag to wipe off dirt marks. Do not use any
aggressive cleaning agents or solvents. Clean the
laser beam outlet at regular intervals with a cotton
wad.
8. Battery disposal
Batteries contain materials that are potentially
harmful to the environment. Never place batteries in
your household refuse, in fire or in water. Batteries
should be collected, recycled or disposed of by
environment-friendly means. Send your old batteries
to ISC GmbH, Eschenstrasse 6 in D-94405 Landau.
You can then be sure that the equipment will be
correctly disposed of by the manufacturer.
9. Ordering spare parts
Please provide the following information on all orders
for spare parts:
Model/type of tool
Article number of the tool
ID number of the device
Spare part number of the part to be replaced
For our latest prices and information please go to
www.isc-gmbh.info
!
ᪿ
᪾
iNTERNATiONALES SERViCE CENTER GmbH
쾷
Anleitung NLW 90-2 SPK1 08.09.2006 10:17 Uhr Seite 7
