7
GB
twisting. Any vacuum cleaner can be connected to
the socket at the rear of the jigsaw. If you require a
special adapter, please contact the manufacturer of
your vacuum cleaner.
5. TECHNICAL DATA
Nominal voltage
230 V ~ 50 Hz
Power consumption
800 W
Cutting rate
500-2800 strokes/min
Stroke height:
18 mm
Cutting depth in wood
100 mm
Cutting depth in plastic
20 mm
Cutting depth in iron
10 mm
Mitre cuts
up to 45° (left and right)
Sound pressure level L
pA
93 dB(A)
Sound power level L
WA
104 dB(A)
Vibration a
hv
6,13 m/s
2
Double isolation
II /
쓑
Weight
2,4 Kg
6. Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
6.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device imme-
diately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts
of the equipment. Ensure that no water can seep
into the device.
6.2 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be
replaced by anyone but a qualified electrician.
6.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
6.4 Ordering replacement parts
Please provide the following information on all orders
for spare parts:
Model/type of machine
Article number of the machine
ID number of the machine
Replacement part number of the required spare
part
For our latest prices and information please go to
www.isc-gmbh.info
7. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
Anleitung BSTL 800 Profi_SPK1:_ 21.12.2006 8:07 Uhr Seite 7