EN
- 19 -
10. Troubleshooting guide
Problem
Possible cause
Remedy
Motor does not
start
a) Internal terminals disconnected
b) Safety lock-o
ff
defective
c) The scari
fi
er housing is clogged
d) Safety plug is not inserted
e) Battery is not correctly inserted
a) By customer service workshop
b) By customer service workshop
c) Change the scari
fi
er depth if
necessary; clean the housing so
that the cutting unit can rotate
freely
d) Insert the safety plug (see 6.)
e) Remove the battery and reinsert
(see 5.)
Motor performance
drops
a) Soil too hard
b) The scari
fi
er housing is clogged
c) Blade badly worn
a) Correct the scari
fi
er depth
b) Clean the housing
c) Replace the blade
Imprecise
scarifying result
a) Blade worn
b) Wrong scari
fi
er height
a) Replace the blade
b) Correct the scari
fi
er depth
Motor is running,
cutting unit is not
rotating
a) Toothed belt is torn
a) By customer service workshop
Important! For protection, the motor is equipped with a thermal switch which cuts out when
the motor is overloaded and switches on again automatically after a short cooling period.
If the equipment will not work in spite of the troubleshooting measures and the voltage supply being OK,
please contact customer service (see section 7.5).
Anl_GC_SC_36_31_Li_USA_SPK7.indb 19
Anl_GC_SC_36_31_Li_USA_SPK7.indb 19
28.01.2020 16:44:12
28.01.2020 16:44:12
