EN
- 13 -
•
Remember that if the equipment has several
tooth units, the movement of one tooth unit
may result in the other tooth units starting to
rotate.
•
While you are adjusting the equipment, take
care not to jam your fingers between moving
teeth and stationary parts of the equipment.
•
Allow the motor to cool before you take the
equipment out of use for an extended period
of time.
•
While you are carrying out maintenance work
on the teeth, remember that the teeth can still
be moved even if the drive has been switched
off.
•
For safety reasons, replace worn or damaged
parts. Use only original spare parts and
original accessories.
•
If the equipment is stopped for maintenance,
inspection or storage purposes or in order to
replace an accessory, you must switch off the
drive, pull out the safety plug and make sure
that all moving parts have come to a complete
standstill. Allow the equipment to cool
down before you carry out any inspections,
adjustments, etc. Treat the equipment with
care and keep it clean.
•
Store the equipment where it is out of
children’s reach.
SAVE THESE INSTRUCTIONS.
Explanation of the symbols used (see Fig. 19)
1 = Important! Read the instructions before using
for the
fi
rst time.
2 = Keep other persons away
3 = Caution, sharp teeth. Keep hands and feet
away. Pull out the safety plug before starting
any maintenance or cleaning work or making
adjustments. The teeth keep on running for a
time after the motor has been switched o
ff
.
4 = Wear hearing and eye protection.
5 = Important! Read the instructions before using
for the
fi
rst time.
6 = Use only batteries which are charged to the
same level.
2. Layout and items supplied
2.1 Layout
1. On/O
ff
switching bar
2. Safety
lock-o
ff
3. Square-ended
drive
4. Marking for scarifying or dethatching blade
width
5. Top push bar
6. Bottom push bar (2x)
7. Push bar holders (2x)
8. Depth
adjustment
9. Battery
cover
10. Ejector
fl
ap
11. Dethatching blade (not included)
12. Cable clips (2x)
13. Fastening screws for push bar (4x)
14. Retaining screws for push bar (2x)
15. Safety plug (Fig. 11, 12)
16. Battery capacity indicator button
17. Battery capacity indicator
18. Pushlock button
19. Lock release
20. Socket head screw
21. Holder for dethatching blade
22. Scari
fi
er Blade
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and su
ff
ocating!
•
Cordless scarifier and lawn dethatcher
•
Original operating instructions with safety
information
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
Anl_GC_SC_36_31_Li_USA_SPK7.indb 13
Anl_GC_SC_36_31_Li_USA_SPK7.indb 13
28.01.2020 16:44:11
28.01.2020 16:44:11
