EINBREW.COM
EINBREW 1V1P USER INSTRUCTIONS
V1.0.6 © ACKSEN LTD 2017
5
SAFETY INFORMATION
•
Please inspect your EINBREW EBC system and accessories for damage when you receive it. If
there is any damage, please do not use the system and contact your supplier or Support for
assistance.
•
Do not operate the system if the power leads show any signs of damage or wear.
•
If you need to clean the surface of your EINBREW EBC system, please ensure that it is fully
disconnected from the mains supply beforehand. We recommend removing the plug from the
socket to ensure disconnection. Use only a damp cloth and do not allow liquid to come in
contact with EINBREW EBC, and ensure the vessel is dry before reconnecting the electricity
supply.
•
Please connect to a plug socket or adapter fitted with an RCD when in use. Ensure that you
utilise the test function on the RCD beforehand to confirm correct operation.
•
Ensure that the supplied power lead is fully unwound during use. If using any extension leads,
ensure that they are fully unwound and have a 16A current capacity when unwound.
•
EINBREW EBC is not meant to be directly utilised by children or vulnerable adults, or around
pets. Please ensure that the device is only used with adequate supervision to ensure safety.
•
EINBREW EBC does not contain any user serviceable parts, and should not be disassembled or
repairs attempted. Please contact your supplier or Support for any assistance required.
•
Ensure that EINBREW EBC is situated away from any liquids being used in the brewing process or
condensate paths that may form
–
its enclosure is not water-resistant.
•
You must manually control the Pump during brewing. This is especially important if you are
using a RIMS system, as it can be dangerous to operate the heater without the pump and water
circulation.
•
Do not operate your brewery or EINBREW EBC unless you are certain it has been correctly and
safely setup. You may need to refer to a qualified/licenced electrician to achieve this.
