MAX 200 mm
MIN 30 mm
=
MAX 200 mm
MIN 30 mm
=
32,75
37,75
23
23
92
18,5
MIN 15
23
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Installation and maintenance manual
Electric screen EiKON
The screen can be mounted either to the ceiling or to the wall.
Before proceeding with the installation, please check the following points:
- Ceiling/Wall must be perfectly smooth and flat.
- Ceiling/Wall must be levelled. In case of need, please use a sprit level.
- Check carefully that ceiling/wall are suitable to support the weight of the screen.
4.2.1 - CEILING MOUNTING
Housing width from side
plate to side plate
Measure the width of the housing including side plates and calculate the
dimensions to be marked on the ceiling in order to drill the holes.
The drawing here at the right side describes the
dimensions of the bracket centre in relation to
the screen housing and to the projection cloth, in
order to be able to calculate the desired position.
In case the ceiling mounting is close to the wall,
please take care that the minimum distance
between the rear side of the housing from the
wall has to be 15 mm.
SCREWS AND PLUGS ARE NOT SUPPLIED.
4.2
INSTALLATION
