Eikon WCS1000, Руководство пользователя

Страница: 13 / 40

13
Pressing the
SET button three times is possible to set the DELEGATE PRIORITY MODE . By pressing

UP or

DOWN button this mode can be set as LIMIT or as FIFO :
: with the delegate priority set as LIMIT, once the maximum NUMBER OF ACTIVE DELEGATES
has been reached, no other delegates can speak until one or more active delegates shut off their
microphone. For example, with 1MAX LIMIT setting only one delegate can speak at the time and no other
delegate can speak until he/she has finished to talk and has released the TALK button.
: with the delegate priority set as FIFO, once the maximum NUMBER OF ACTIVE DELEGATES has
reached, the next delegate activating the microphone automatically shuts off the microphone of the first
active delegate, so the priority is like a sequence of First In / First Out. For example with 1MAX FIFO setting
only one delegate can speak at the time and any other delegate can shut him/her off and talk just by pressing
the TALK button.
WCS1000RXV2 AUDIO RF CHANNEL SET-UP
When the WCS1000RXV2 is turned ON, the last audio RF channel setting appears on the display, for example:
The first number is the chairman audio RF channel while the following numbers, within the square brackets,
are the delegate audio RF channels. The chairman channel operates in the 610-634 MHz range, the delegate
channels operate in the 640-634 MHz range, with a channel separation of 250KHz.

The chairman and delegate channels operates in different ranges, so there is no interference
between them.
However all delegate channels operate in the same range, so the channel
numbers must be different to avoid interferences .
To set the audio RF channel channels you can operate manually or use the auto-scan function.
Manual setting
Press SET key one or several times until the channel number is flashing. Then press

UP or

DOWN button
to select the channel and then press SET to save it or wait about 3 seconds until the system has saved the
setting automatically (the number will stop flashing).
Auto-scan setting
Press SET key one or several times until the channel number is flashing and then press and hold the SET key
until the display shows the symbol ---. Release the key and the system will scan all audio channel (00-76) and
automatically select the best one.
In order to select the correct frequency for each channel and to avoid interferences, we suggest to use the
following
procedure :
1) Set the first delegate channel in the receiver unit. Then switch on the first delegate microphone and
press the TALK button, leaving the unit active.
2) Set the second delegate channel in the receiver unit. Then switch on the second delegate
microphone and press TALK button, leaving the unit active.
3) Repeat the procedure for delegate channel three and four .