Eikon WCS1000, Руководство пользователя

Страница: 12 / 40

12
again the SET button you can also select RF channels D2 or D3. D4 cannot be disabled because at least one
channel must be active.

TIP: this function is useful to reduce the number of delegate RF channels that can be active
simultaneously. For example, in case of two adjacent meeting rooms using two WCS1000 system, if
you reduce the active channels of both systems to two each they can both operate in a more
reliable way.
NOTE: regardless of how many RF channels are active, the maximum number of delegate units that
can be used in a WCS1000 system is always 256, see also the delegates set-up operation further in
this manual.
Pressing again the SET button the display shows the Test setting:
This is a FACTORY mode used for the device test.
Pressing again the POWER button the receiver will be initialized and enter the STANDARD operating mode:
The display will show the last set-up status (the following is an example):
This is the STANDARD menu and the most used parameters can be set here.
Pressing the
SET button one time is possible to set the CHAIRMAN PRIORITY MODE : by pressing

UP or

DOWN button you can select CFREE or CONLY .
: in this mode, when the chairman presses the PRIORITY button all delegates are shut down and
he has the priority to speak, but any delegate can speak again together with the chairman just by pressing his
TALK button.
: when the chairman presses the PRIORITY button all delegates are shut down and he has the
priority to speak, but in this case the delegates cannot speak until the chairman gives the word to them by
releasing the priority (pressing the TALK button).
Pressing the
SET button two times it ’ s possible to set the maximum NUMBER OF ACTIVE DELEGATES that can
speak simultaneously. By pressing

UP or

DOWN button the number of delegates can be set from 1 to 4: