Eiki Conference LC-WUL100, Руководство по обслуживанию

Страница: 9 / 162

-9-
Maintenance
Turn off the projector, and unplug the AC power cord
from the AC outlet.
First, clean up the dust on the projector and around the
air vents.
1
2
Press
d
downwards on the filter cover to release the
latch and open the filter cover.
3
Put the new one back into the position and close the
filter cover. Make sure that the filter cartridge is properly
and fully inserted.
5
CaUTiON
Make sure the filter cartridge is inserted in the
projector. If the filter cartridge is not inserted, the
projector cannot be turned on. Make sure the filter
cover is closed when using the projector.
Do not put anything into the air vents. Doing so may
result in malfunction of the projector.
4
reset the filter counter and the scroll counter . See
next page.
6
Replacing the Filter Cartridge
Pull out the filter cartridge. When taking out the filter
cartridge, put your finger on the filter cartridge’s tab and
then pull.
reCOMMeNDaTiON
We recommend avoiding dusty/smoky environments
when operating the projector. Usage in these environ-
ments may cause a poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, liquid crystal panels, or op-
tical elements inside the projector. Such condition may de-
grade the quality of the projected image.
When the symptoms above are noticed, contact your autho-
rized dealer or service station for proper cleaning.
OrDer rePLaCeMeNT FiLTer CarTriDge
Type No. POa-FiL-080
service Parts No.: 610 346 9034
Connect the AC power cord to the projector and turn
on the projector.
7
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged
with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely af-
fect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter easily.
The projector monitors the condition of the filter at all time and replaces a filter with a new one automatically when it
detects the clogging.
If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement
icon appears on the screen and the WARNING FILTER indicator on the top panel lights up. When you see this icon,
replace the filter cartridge and reset the Filter counter and the Scroll counter.
Filter cover
Latch
Filter cartridge
Tab