-76-
Electrical Adjustment
b
Auto calibration (PC)
Input mode Input 1 [RGB (PC Analog)]
Input signal 16-step gray scale computer signal
Screen size Normal
1. Enter the service mode.
2. Select Group "
260
", No. "
100
" and set data value "
1
".
3. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
4. Select Group "
260
", No. "
100
" and set data value "
2
".
5. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
6. Select Group "
260
", No. "
100
" and set data value "
0
".
n
Auto calibration (Composite)
Input mode Input 2 [Video]
Input signal 100% color bar composite video signal
Screen size Normal
1. Enter the service mode.
2. Select Group "
260
", No. "
100
" and set data value "
3
".
3. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
4. Select Group "
260
", No. "
100
" and set data value "
4
".
5. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
6. Select Group "
260
", No. "
100
" and set data value "
0
".
m
Auto calibration (Component)
Input mode Input 2 [Y,Pb/Cb,Pr/Cr]
Input signal 100% color bar component video signal
(480i)
Screen size Normal
1. Enter the service mode.
2. Select Group "
260
", No. "
100
" and set data value "
5
".
3. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
4. Select Group "
260
", No. "
100
" and set data value "
6
".
5. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
6. Select Group "
260
", No. "
100
" and set data value "
0
"
Adjustments item no. [5] to [7] are carried out at the
spare parts shipment in the factory, therefore they are
not required when the main board is replaced with
new one.
.
Gamma shipment adjustment
Software
PROJECTOR SERVICE TOOL v4.20
Use the software to obtain the proper gray scale. See the
further information of the software instruction manual.
⁄1
Color shading correction adjustment
Software
PROJECTOR SERVICE TOOL v4.20
Use the software to correct the color shading of the
screen. See the further information of the software in-
struction manual.
The color shading correction adjustment for this model
should be performed with the whole-gray patterns speci-
fied as below.
8-input patterns:
5% gray, 10% gray, 15% gray, 20% gray,
30% gray, 50% gray, 60% gray, 80% gray
,
Common center adjustment
Input mode Input 1 [RGB (PC Analog)]
Input signal 50% (R,G,B) pattern signal
1. Enter the service mode.
2. Project only one color component to the screen.
Select Group "
101
", No. "
4
" and then change data val-
ue from "
2
" to "
0
".
3. Change data value to obtain
the minimum flicker
for
each color on screen.
Group No. Screen
100 - 9
only green color picture
100 - 10
only blue color picture
100 - 11
only red color picture
4. Select Group "
101
", No. "
4
" and then change data val-
ue from "
0
" to "
2
".
⁄0
Ye device shipment adjustment
Software
PROJECTOR SERVICE TOOL v4.20
Use the software to obtain the proper gray scale. See the
further information of the software instruction manual.
Содержание 1 122 511 01
