8
6.2 Converter buttons
The converter buttons are used to change control parameters, to
operate the MP 1 pump and to change over between the displays
in order to monitor the status of the pump.
Some of the buttons incorporate indicator lights.
Fig. 9
Converter buttons
* For possible display texts, see page 62.
Indicator light
Description
[FWD]
button (green)
The indicator light is on when the motor
rotates in the forward direction.
[REV]
button (green)
The indicator light is on when the motor
rotates in the reverse direction.
[STOP]
button (red)
The indicator light is on when [STOP]
has been pressed.
G
rA
610
3
[STOP]
Press [STOP] to stop the motor.
[JOG]
[JOG] is disabled.
[REV]
Press [REV] to reverse the
direction of rotation of the
motor.
[FWD]
Press [FWD] to start the pump
(forward direction of rotation).
[HELP]
Provides help for each
display, setup parameter and
fault*.
Press [HELP] to view/close
the help function.
[LOCAL/REMOTE]
The converter must always be in
LOCAL mode.
[ENTER]
In the display mode, [ENTER] is
used to directly set the desired
speed.
[F2]
Press [F2] to reset the converter.
Arrow buttons
Press [
] to increase and [
] to decrease
the value of the displayed parameter.
Press [
]
or [
]
to move the cursor between
the digits.
[F1]
Press [F1] to enter the
programming mode.
The converter is factory-set.
DO NOT CHANGE THE SETUP!
[MENU/ESC]
When [MENU/ESC] is
pressed, a menu with six
items appears:
STATUS
QUICK SETUP
PROGRAMMING
EVENT LOG
DIAGNOSTICS
DISPLAY OPTIONS
Press [MENU/ESC] again to
return.
