EIBENSTOCK EMH 650, Оригинальное руководство пользователя

Страница: 13 / 20

13

Do not use the tool in an environment with danger of explosion.

Do not use the tool standing on a ladder.

Do not drill into asbestos-containing materials.

Do not carry the tool at its cable, and always check the tool, cable and
plug before use. Have damages only repaired by specialists. Only
insert the plug into the socket when the tool switch is off.

Modifications of the tool are prohibited.

When the machine runs outside, always use a protection switch
(30 mA max.) against fault current.

Plug and switch the machine off if it is not under supervision, e. g. in
case of putting up and stripping down the machine, in case of setting
up and striking, voltage drop or when fixing or mounting an accessory.

Switch the machine off if it stops for whatever reason. This way, you
avoid that it starts suddenly and not under supervision.

Do not use the machine if one part of the housing is damaged or in
case of damages on the switch, cable or plug.

While working always lead the line cord and extension cord to the back
away from the machine.

Hold power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory or fastener may contact
hidden wiring.
Cutting accessory and fasteners contacting a “live”
wire may make exposed metal parts of the power tool “live” and could
give the operator an electric shock.

Electric tools have to be inspected visually by a specialist in regular
intervals.

Do not touch rotating parts.

The tool may be used only in two-hand operation or with the drill rig.

Keep the handles dry, clean and free of oil and grease.

Persons under 16 years of age are not allowed to use the machine.

During use, the user must wear goggles and protective gloves.

Wear ear protectors with rotary hammers. Exposure to noise can
cause hearing loss.

During use, hold the machine with both hands and maintain a
safe standing position. Always consider the reaction moment of
the tool.

Always work with concentration. Always work in a carefully
considered way and do not use the tool if you are lacking
consideration.
For further safety instructions, please refer to the enclosure!