manualshive.com logo in svg

Ei Electronics Ei603TYC, Руководство пользователя, Страница: 35 / 60

Поделиться
Скачать
Ei Electronics Ei603TYC Скачать руководство пользователя страница 35

If it is not convenient to replace the Alarm immediately, then press the test 

EXWWRQWRVLOHQFHWKHORZEDWWHU\EHHSVDQGVWRSWKHUHG/('IODVKLQJIRU

hours. This can be repeated as required.

12.2.2. Contaminated chamber

If the Alarm sounds without any apparent smoke being present, press the test 
button to silence the Alarm for 10 minutes (as described in 12.1.5 above). If the 
Alarm sounds again it may be contaminated. Pressing the test button again, 
within 4 minutes of the Alarm re-sounding, will get the Alarm to compensate 
for chamber contamination. This will normally resolve the problem.
If the Alarm re-sounds for a third time, the Alarm is excessively contaminated 
and must be replaced. If it is not convenient to replace it immediately, pressing 
the test button within 4 minutes of it going into alarm (for the third time) will 
silence the Alarm for 8 hours – however it will give two short beeps (second 
apart) every 10 minutes to remind the user it has been disabled. If the 
contamination clears the Alarm will return to normal operation.
(Note: this does not reduce the users fire protection, as a Smoke Alarm in 
continuous alarm due to a fault, is useless and must be silenced – by taking 
the Alarm down or as described here. This procedure has the added benefits 
that the user is reminded every 10 minutes by two short beeps that the Alarm 
needs to be replaced and that if the problem clears the Alarm will return to 
detecting fire). Pressing the test button again will silence the Alarm for a 
further 8 hours.

35

Содержание Ei603TYC





























































Отзывы:

Нет отзывов