Ei Electronics Ei3100RF? Ei3500RF Скачать руководство пользователя страница 12

Страница: 12 / 20

Check whether there is some source of smoke or fumes, for

example cooking fumes being drawn past the Smoke Alarm

by an extractor.
If there are frequent nuisance/false alarms it may be necessary

to re-locate the device away from the source of the fumes. (If

you have an Ionisation alarm model Ei3100RF / Ei3500RF,

replacing it with an Optical Alarm Ei3105RF often sloves the

problem. The Ei3105RF is less prone to nuisance alarms due

to cooking fumes (e.g. toast, grilling or frying)).
If you installed the smoke alarms as received and did not

house code them, you may be receiving an alarm signal from

a neighbouring system. This can be easily rectified by “house

coding” your alarms (see section 6).
Ei3105RF only
• To cancel a false alarm, press the test/hush button. The

alarm will automatically switch to a reduced sensitivity

condition. This condition allows unwanted alarms to be

silenced for a period of approximately 10 minutes. The red

light will flash every 10 seconds (instead of 40 seconds) to

let you know the unit has been silenced.

• The unit will reset to normal sensitivity at the end of the

silenced period. If additional silenced time is required,

simply push the test/hush button again.

Ei3100RF / Ei3500RF only
• If you have a nuisance alarm with an Ei3100RF / Ei3500RF

simply fan the smoke away with a newspaper or similar.

• If the cause of the alarm is not clear, it should be assumed

that it is due to an actual fire and the dwelling should be

evacuated immediately.

If kitchen usage/layout is such that there are an unacceptable

level of nuisance alarms, re-locate the Smoke Alarm further

away where it will be less affected by cooking fumes etc.
7.4 Cleaning your Smoke Alarm
Clean your Smoke Alarm regularly. Use a soft bristle brush or

the brush attachment of your vacuum cleaner to remove dust

and cobwebs from the sides and cover slots where the smoke

enters. Keep cover closed while cleaning. Do not vacuum or

brush inside the Smoke Alarm.
WARNING: Do not paint your Smoke Alarm.
Other than the maintenance and cleaning described in

this leaflet, no other customer servicing of this product is

required. Repairs, when needed, must be performed by the

manufacturer.
7.5 Automatic Self-Test - Ei3105RF only
The smoke chamber automatically tests itself every 40

seconds. If the chamber is degraded it will beep without the

red light flashing at the same time. If this happens clean the

Содержание Ei3100RF? Ei3500RF





















Результаты поиска

Содержание Ei3100RF? Ei3500RF

Отзывы:

Бренды по названию

Популярные бренды

Ei Electronics Ei3100RF? Ei3500RF, Инструкция

Результаты поиска

Содержание Ei3100RF? Ei3500RF

Отзывы:

Бренды по названию

Популярные бренды